1. Protein Tyrosine Kinase/RTK Cell Cycle/DNA Damage Epigenetics Stem Cell/Wnt JAK/STAT Signaling
  2. Btk Polo-like Kinase (PLK) JAK
  3. (Z)-LFM-A13

LFM-A13 是一种有效的 BTKJAK2PLK 抑制剂,可抑制 BTK,Plx1 和 PLK3 的活性,IC50 分别为 2.5 μM,10 μM 和 61 μM。

MCE 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务

(Z)-LFM-A13 Chemical Structure

(Z)-LFM-A13 Chemical Structure

CAS No. : 244240-24-2

1.  客户无需承担相应的运输费用。

2.  同一机构(单位)同一产品试用装仅限申领一次,同一机构(单位)一年内

     可免费申领三个不同产品的试用装。

3.  试用装只面向终端客户

规格 价格 是否有货 数量
10 mM * 1 mL in DMSO ¥605
In-stock
5 mg ¥550
In-stock
10 mg ¥800
In-stock
50 mg ¥3180
In-stock
100 mg   询价  
200 mg   询价  

* Please select Quantity before adding items.

Other Forms of (Z)-LFM-A13:

    (Z)-LFM-A13 purchased from MCE. Usage Cited in: Oncotarget. 2017 Jul 25;8(30):49238-49252.  [Abstract]

    HeLa and SiHa cells are treated with DMSO and LFM-A13, a pharmacologic inhibitor of BMX, and the phosphorylation and total BMX levels are determined using a western blot analysis.

    查看 Polo-like Kinase (PLK) 亚型特异性产品:

    查看 JAK 亚型特异性产品:

    • 生物活性

    • 实验参考方法

    • 纯度 & 产品资料

    • 参考文献

    生物活性

    LFM-A13 is a potent BTK, JAK2, PLK inhibitor, inhibits recombinant BTK, Plx1 and PLK3 with IC50s of 2.5 μM, 10 μM and 61 μM; LFM-A13 shows no effects on JAK1 and JAK3, Src family kinase HCK, EGFR and IRK.

    IC50 & Target[4][1]

    Plx1

    10 μM (IC50)

    PLK3

    61 μM (IC50)

    BRK

    267 μM (IC50)

    BMX

    281 μM (IC50)

    FYN

    240 μM (IC50)

    Hepatocyte growth factor receptor kinase (Met)

    215 μM (IC50)

    BTK

    2.5 μM (IC50)

    体外研究
    (In Vitro)

    LFM-A13 significantly inhibits BTK activity with an IC50 of 6.2 ± 0.3 μg/mL (= 17.2 ± 0.8 μM). The calculated Kis of LFM-A13 for BTK, JAK1, JAK3, IRK, EGFR and HCK are 1.4, 110, 148, 31.6, 166 and 214 μM. LFM-A13 (200 μM) markedly increases the chemosensitivity of ALL-1 cells to ceramide-induced apoptosis[1]. LFM-A13 (100 μM) suppresses Epo-induced phosphorylation of EpoR, Jak2, Btk, Stat5 and Erk1/2 in R10 cells. LFM-A13 (100 μM) inhibits auto-phosphorylation of Jak2, Tec and Btk rather than Lyn kinase auto-phosphorylation in COS cells[2]. LFM-A13 potently inhibits Plx1 with IC50 of 10 μM; also inhibits BRK, BMX, FYN and with IC50s of 267, 281, 240 and 215 μM[4].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    体内研究
    (In Vivo)

    LFM-A13 (25, 50 and 100 mg/kg) shows no apparent toxicity to rats. LFM-A13 (50 mg/kg, three times a week, i.p.) attenuates mammary tumorigenesis in mice. LFM-A13 alone or in combination with paclitaxel shows marked effect on the breast tumor incidence, mean tumor numbers, average tumor weight, and size in BALB/c mice. LFM-A13 (50 mg/kg, three times a week, i.p.) significantly decreases PLK1, cyclin D1, CDK-4, P53 and Bcl-2 expression, but increases the expression of p21, IκB, Bax and caspase 3 expression in mice[3]. LFM-A13 (200 mg/kg) does not cause hematologic toxicity in rats. LFM-A13 (10 or 50 mg/kg, i.p.) exhibits anti-tumor effects dose dependently in the MMTV/Neu transgenic mouse model of breast cancer[4].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    分子量

    360.01

    Formula

    C11H8Br2N2O2

    CAS 号
    性状

    固体

    颜色

    Light yellow to yellow

    运输条件

    Room temperature in continental US; may vary elsewhere.

    储存方式
    Powder -20°C 3 years
    4°C 2 years
    In solvent -80°C 2 years
    -20°C 1 year
    溶解性数据
    In Vitro: 

    DMSO 中的溶解度 : ≥ 42 mg/mL (116.66 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

    * "≥" means soluble, but saturation unknown.

    配制储备液
    浓度 溶剂体积 质量 1 mg 5 mg 10 mg
    1 mM 2.7777 mL 13.8885 mL 27.7770 mL
    5 mM 0.5555 mL 2.7777 mL 5.5554 mL
    查看完整储备液配制表

    * 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
    储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

    • 摩尔计算器

    • 稀释计算器

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    质量
    =
    浓度
    ×
    体积
    ×
    分子量 *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    浓度 (start)

    C1

    ×
    体积 (start)

    V1

    =
    浓度 (final)

    C2

    ×
    体积 (final)

    V2

    In Vivo:

    请根据您的 实验动物和给药方式 选择适当的溶解方案。

    以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:
    ——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用
    以下溶剂前显示的百分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

    • 方案 一

      请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (6.94 mM); 澄清溶液

      此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液。

      1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;再向上述体系中加入 50 μL Tween-80,混合均匀;然后再继续加入 450 μL 生理盐水 定容至 1 mL

      生理盐水的配制:将 0.9 g 氯化钠,溶解于 ddH₂O 并定容至 100 mL,可以得到澄清透明的生理盐水溶液。
    • 方案 二

      请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: 2.5 mg/mL (6.94 mM); 悬浊液; 超声助溶

      此方案可获得 2.5 mg/mL的均匀悬浊液,悬浊液可用于口服和腹腔注射。

      1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液 中,混合均匀。

      20% SBE-β-CD in Saline 的配制(4°C,储存一周):2 g SBE-β-CD(磺丁基醚 β-环糊精)粉末定容于 10 mL 的生理盐水中,完全溶解至澄清透明。
    动物溶解方案计算器
    请输入动物实验的基本信息:

    给药剂量

    mg/kg

    动物的平均体重

    g

    每只动物的给药体积

    μL

    动物数量

    由于实验过程有损耗,建议您多配一只动物的量
    请输入您的动物体内配方组成:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    如果您的动物是免疫缺陷鼠或者体弱鼠,建议 DMSO 中的在最后工作液体系中的占比尽量不超过 2%。
    方案所需 助溶剂 包括:DMSO ,均可在 MCE 网站选购。 Tween 80,均可在 MCE 网站选购。
    计算结果
    工作液所需浓度 : mg/mL
    储备液配制方法 : mg 药物溶于 μL  DMSO(母液浓度为 mg/mL)。
    您所需的储备液浓度超过该产品的实测溶解度,以下方案仅供参考,如有需要,请与 MCE 中国技术支持联系。
    动物实验体内工作液的配制方法 : 取 μL DMSO 储备液,加入 μL  μL ,混合均匀至澄清,再加 μL Tween 80,混合均匀至澄清,再加 μL 生理盐水
    连续给药周期超过半月以上,请谨慎选择该方案。
    请确保第一步储备液溶解至澄清状态,从左到右依次添加助溶剂。您可采用超声加热 (超声清洗仪,建议频次 20-40 kHz),涡旋吹打等方式辅助溶解。
    纯度 & 产品资料

    纯度: 99.97%

    参考文献
    Kinase Assay
    [4]

    Purified His6-Plx1 (250 ng) is added to a 20 μL reaction mixture containing 1× kinase buffer (10 mM Tris-HCl, pH 7.5, 10 mM MgCl2, and 1 mM TT), 25 μM cold ATP, and 1 μCi [γ-32P]ATP in the presence of different concentrations of LFM-A13 ranging from 5 μg/mL (13.9 μM) to 100 μg/mL (278 μM). The reaction mixtures are incubated at room temperature for 15-30 min and autophosphorylation is stopped by addition of 2× SDS-PAGE reducing sample buffer. A parallel experiment is performed in the presence of cold ATP. The kinase reactions are then subjected to immunoblotting using the commercially available anti-Plk antibodies. The immunoblots confirmed that the same amount of Plx1 protein is present in each reaction. In addition, we also examined the effects of LFM-A13 on substrate phosphorylation by Plx1. In brief, 250 ng of purified Plx1 is first incubated at room temperature for one hour with different concentrations of LFM-A13. After one hour of incubation, the tubes containing the reaction mixtures are put on ice and the substrate, GST-Cdc25 peptide (254-316) (200 ng), kinase buffer, and [γ-32P]ATP are added and the kinase reaction allowed to proceed for 15 min at room temperature. Immunoblotting with anti-Cdc25 antibodies is used to confirm that equal amounts of the substrate peptide are present in each reaction mixture. Anti-Plk antibodies, the polyclonal antibodies to gluthathione-S-transferase (GST) and ECL kit are used in the assay. The mode of human PLK3 inhibition by LFM-A13 is examined in titration experiments using increasing concentrations of [γ-32P]ATP and purified N-terminal His6-tagged recombinant human PLK3, residues 19-301, expressed by baculovirus in Sf21 insect cells. In brief, in a final reaction volume of 25 μL, PLK3 (h) (5-10 mU) is incubated with 8 mM MOPS, pH 7.0, 0.2 mM EDTA, 2 mg/mL casein, 10 mM Mg acetate, and [γ-32P-ATP] (specific activity approx. 500 cpm/pmol, concentration as required). The reaction is initiated by the addition of the MgATP mix. After incubation for 40 min at room temperature, the reaction is stopped by the addition of 5 μL of a 3% phosphoric acid solution. Ten microliters of the reaction is then spotted onto a P30 filtermat and washed three times for 5 min in 75 mM phosphoric acid and once in methanol prior to drying and scintillation counting. The Ki of PLK3 by LFM-A13 is calculated from the reciprocal plots of the intensity of phosphorylation of the substrate (1/v) versus the concentration of the inhibitor (i) (viz., LFM-A13). From this Dixon plot, the Ki represents the dissociation constants of the EI complex, which is determined by the point of linear intersection[4].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    Animal Administration
    [4]

    Mice[4]
    Neu transgenic mice carrying one or more tumors are randomLy placed in the study. For the evaluation of tumor kinetics, tumor-bearing mice are randomLy assigned to either vehicle control or treatment groups. Tumor growth is determined by the measurement of tumors with a caliper in three dimensions three days a week and expressed as tumor volume in cubic millimeters (mm3). Tumor volumes are calculated using the formula for the volume of a prolate spheroid, V = 4/3 × 3. 14 × length/2 × width/2 × depth/2. Due to the large heterogeneity in transgenic tumor volumes on day 0, tumor growth for each mouse is normalized to the starting volume for that particular tumor. Therefore, each mouse also serves as its own control, and the tumor growth curves are generated to show the rate of change in tumor volumes. LFM-A13 (10 or 50 mg/kg) is administered by twice daily intraperitoneal injections on 5 consecutive days per week. Paclitaxel is administered intraperitoneally on days 1, 3, 5, 8, 10, and 12 at a dose level of 6.7 mg/kg. Gemcitabine is administered on days 1, 8, and 15 at a dose level of 33.7 mg/kg.
    Rats[4]
    Lewis rats are kept in microisolater cages containing autoclaved food, water, and bedding. Lewis rats are treated with i.v. injections of LFM-A13 at multiple dose levels. LFM-A13 is administered as a 0.5 mL bolus injection containing 10% DMSO as a vehicle. Animals are electively sacrificed on day 7 to determine the toxicity of LFM-A13 by evaluating multiple organs for the presence of toxic lesions. Blood is collected by intracardiac puncture following anesthesia with ketamine:xylazine and immediately heparinized. Blood counts (red blood cells [RBC], white blood cells [WBC], and platelets [Plt]) are determined using a HESKA Vet ABC-Diff Hematology Analyzer. Absolute neutrophil counts (ANC) and absolute lymphocyte counts (ALC) are calculated from WBC values after determining the percentages of neutrophils and lymphocytes by a manual differential count. Values for the laboratory parameters are pooled for vehicle controls and LFM-A13 treatments, and for each parameter differences between means are evaluated for statistical significance using Students t-test (vehicle vs LFM-A13 treatment, unequal variances, two-tailed). The calculations are performed in Excel spreadsheets. To determine significant effects, the p-values are adjusted using the Bonferroni method to control for random variation. For histopathologic studies, formalin fixed tissues are dehydrated and embedded in paraffin by routine methods. Glass slides with affixed 4-5 micron tissue sections are prepared and stained with hematoxylin and eosin.

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    参考文献

    完整储备液配制表

    * 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
    储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

    可选溶剂 浓度 溶剂体积 质量 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 2.7777 mL 13.8885 mL 27.7770 mL 69.4425 mL
    5 mM 0.5555 mL 2.7777 mL 5.5554 mL 13.8885 mL
    10 mM 0.2778 mL 1.3889 mL 2.7777 mL 6.9443 mL
    15 mM 0.1852 mL 0.9259 mL 1.8518 mL 4.6295 mL
    20 mM 0.1389 mL 0.6944 mL 1.3889 mL 3.4721 mL
    25 mM 0.1111 mL 0.5555 mL 1.1111 mL 2.7777 mL
    30 mM 0.0926 mL 0.4630 mL 0.9259 mL 2.3148 mL
    40 mM 0.0694 mL 0.3472 mL 0.6944 mL 1.7361 mL
    50 mM 0.0556 mL 0.2778 mL 0.5555 mL 1.3889 mL
    60 mM 0.0463 mL 0.2315 mL 0.4630 mL 1.1574 mL
    80 mM 0.0347 mL 0.1736 mL 0.3472 mL 0.8680 mL
    100 mM 0.0278 mL 0.1389 mL 0.2778 mL 0.6944 mL
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    您最近查看的产品:

    Your information is safe with us. * Required Fields.

       产品名称:

     

    * 需求量:

    * 客户姓名:

     

    * Email:

    * 电话:

     

    * 公司或机构名称:

       留言给我们:

    Bulk Inquiry

    Inquiry Information

    产品名称:
    (Z)-LFM-A13
    目录号:
    HY-18009
    需求量: