1. Membrane Transporter/Ion Channel
  2. Potassium Channel
  3. Clamikalant sodium

Clamikalant sodium  (Synonyms: HMR 1098)

目录号: HY-15208 纯度: 98.80%
COA 产品使用指南

Clamikalant sodium (HMR 1098) 是一种非选择性和 ATP 敏感性钾 (KATP) 通道阻滞剂。可用于心律不齐的研究。

MCE 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务

Clamikalant sodium Chemical Structure

Clamikalant sodium Chemical Structure

CAS No. : 261717-22-0

1.  客户无需承担相应的运输费用。

2.  同一机构(单位)同一产品试用装仅限申领一次,同一机构(单位)一年内

     可免费申领三个不同产品的试用装。

3.  试用装只面向终端客户

规格 价格 是否有货 数量
10 mM * 1 mL in DMSO ¥1410
In-stock
5 mg ¥1300
In-stock
10 mg ¥2150
In-stock
25 mg ¥4300
In-stock
50 mg ¥6900
In-stock
100 mg   询价  
200 mg   询价  

* Please select Quantity before adding items.

Customer Review

  • 生物活性

  • 纯度 & 产品资料

  • 参考文献

生物活性

Clamikalant sodium (HMR 1098) is an ATP-sensitive potassium (KATP) channel blocker. Clamikalant sodium can be used for the research of arrhythmia[1].

体外研究
(In Vitro)

Clamikalant sodium (HMR 1098; 40 μM) prevents improvement effect of Levosimendam on left ventricular developed pressure (LVDP) recovery rate, abolishes the inhibitory effect of Levosimendan on hypothermic preservation-induced activation of calpain, cleavage of Bid, and apoptosis[2].
Clamikalant sodium (HMR 1098; 30 µM, 24 hours) reduces cellular viability, increases the apoptosis of Neonatal rat cardiomyocytes (NRCs) [3].
Clamikalant sodium (30 µM) decreases the Bcl-2 protein level and increases the Bax protein level in the LPS-exposed NRCs[3].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

Cell Viability Assay[3]

Cell Line: Neonatal rat cardiomyocytes (NRCs)
Concentration: 30 µM
Incubation Time: 24 hours
Result: Reduced cellular viability to 42.8±6.3% compared with the LPS group.

Western Blot Analysis[3]

Cell Line: Neonatal rat cardiomyocytes (NRCs)
Concentration: 30 µM
Incubation Time: 24 hours
Result: Decreased the Bcl-2 protein level and increased the Bax protein level.
体内研究
(In Vivo)

Clamikalant sodium (HMR 1098; 6.0 mg/kg; 5 min prior to EET administration) completely abolishes the cardioprotection produced by epoxyeicosatrienoic acid (EET)[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

493.96

Formula

C19H21ClN3NaO5S2

CAS 号
性状

固体

颜色

White to off-white

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶解性数据
In Vitro: 

DMSO 中的溶解度 : 50 mg/mL (101.22 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.0245 mL 10.1223 mL 20.2446 mL
5 mM 0.4049 mL 2.0245 mL 4.0489 mL
查看完整储备液配制表

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

  • 摩尔计算器

  • 稀释计算器

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

质量
=
浓度
×
体积
×
分子量 *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

浓度 (start)

C1

×
体积 (start)

V1

=
浓度 (final)

C2

×
体积 (final)

V2

In Vivo:

请根据您的 实验动物和给药方式 选择适当的溶解方案。

以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:
——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用
以下溶剂前显示的百分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 方案 一

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (5.06 mM); 澄清溶液

    此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液。

    1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;再向上述体系中加入 50 μL Tween-80,混合均匀;然后再继续加入 450 μL 生理盐水 定容至 1 mL

    生理盐水的配制:将 0.9 g 氯化钠,溶解于 ddH₂O 并定容至 100 mL,可以得到澄清透明的生理盐水溶液。
  • 方案 二

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (5.06 mM); 澄清溶液

    此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液。

    1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液 中,混合均匀。

    20% SBE-β-CD in Saline 的配制(4°C,储存一周):2 g SBE-β-CD(磺丁基醚 β-环糊精)粉末定容于 10 mL 的生理盐水中,完全溶解至澄清透明。
动物溶解方案计算器
请输入动物实验的基本信息:

给药剂量

mg/kg

动物的平均体重

g

每只动物的给药体积

μL

动物数量

由于实验过程有损耗,建议您多配一只动物的量
请输入您的动物体内配方组成:
%
DMSO +
+
%
Tween-80 +
%
Saline
如果您的动物是免疫缺陷鼠或者体弱鼠,建议 DMSO 中的在最后工作液体系中的占比尽量不超过 2%。
方案所需 助溶剂 包括:DMSO ,均可在 MCE 网站选购。 Tween 80,均可在 MCE 网站选购。
计算结果
工作液所需浓度 : mg/mL
储备液配制方法 : mg 药物溶于 μL  DMSO(母液浓度为 mg/mL)。

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

您所需的储备液浓度超过该产品的实测溶解度,以下方案仅供参考,如有需要,请与 MCE 中国技术支持联系。
动物实验体内工作液的配制方法 : 取 μL DMSO 储备液,加入 μL  μL ,混合均匀至澄清,再加 μL Tween 80,混合均匀至澄清,再加 μL 生理盐水
连续给药周期超过半月以上,请谨慎选择该方案。
请确保第一步储备液溶解至澄清状态,从左到右依次添加助溶剂。您可采用超声加热 (超声清洗仪,建议频次 20-40 kHz),涡旋吹打等方式辅助溶解。
纯度 & 产品资料

纯度: 98.80%

参考文献

Clamikalant sodium 相关分类

完整储备液配制表

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

可选溶剂 浓度 溶剂体积 质量 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.0245 mL 10.1223 mL 20.2446 mL 50.6114 mL
5 mM 0.4049 mL 2.0245 mL 4.0489 mL 10.1223 mL
10 mM 0.2024 mL 1.0122 mL 2.0245 mL 5.0611 mL
15 mM 0.1350 mL 0.6748 mL 1.3496 mL 3.3741 mL
20 mM 0.1012 mL 0.5061 mL 1.0122 mL 2.5306 mL
25 mM 0.0810 mL 0.4049 mL 0.8098 mL 2.0245 mL
30 mM 0.0675 mL 0.3374 mL 0.6748 mL 1.6870 mL
40 mM 0.0506 mL 0.2531 mL 0.5061 mL 1.2653 mL
50 mM 0.0405 mL 0.2024 mL 0.4049 mL 1.0122 mL
60 mM 0.0337 mL 0.1687 mL 0.3374 mL 0.8435 mL
80 mM 0.0253 mL 0.1265 mL 0.2531 mL 0.6326 mL
100 mM 0.0202 mL 0.1012 mL 0.2024 mL 0.5061 mL
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

您最近查看的产品:

Your information is safe with us. * Required Fields.

   产品名称:

 

* 需求量:

* 客户姓名:

 

* Email:

* 电话:

 

* 公司或机构名称:

   留言给我们:

Bulk Inquiry

Inquiry Information

产品名称:
Clamikalant sodium
目录号:
HY-15208
需求量: